Foldable Solar Panel Assembly
Monocrystal-line Silicon Flexible, Foldable Solar Panel Assembly
The guide model compass is used for locating the southern orientation for solar experiments. The dial is graduated in 2 degree increments for high resolution measurements.
- Compass with integrated case
- Two degree increment resolution
Battery and Charging System Monitor
The battery and charging system monitor provides the user with the state of charge and output voltage of the battery and the charge level and voltage provided by the solar controller in the solar4POWER system.
It plugs in to the USB/Charger port for direct access to the battery. The voltage indicates the battery is being charged (14.4V), in maintenance float (13.5V), not charging but fully charged (12.6V) or fully discharged (11.0V).
- Displays System Voltage
- LED Indicators for Charge Level
- Can used in vehicles
- Adjustable Display
120W Monocrystal-line Silicon Solar Panel
120W Monocrystal-line Silicon Solar Panel covered w/ high transmission, tempered glass in black Aluminum alloy, anodized frame with black nylon protective case.
- 120W Total Output from Two 60W Panels
- Folds in Half for Easy Carrying and Storage
- Cables Terminate in MC4 Connectors
- Legs fold out for positioning panels
- Carrying case included
Dimensions (Each Panel): Durable Nylon Case, 28.35 in x 20.08 in x 3.15 in (720 x 510 x 80mm).
Dimensions (Generator): Rugged Case, 21.89 in x 13.96 in x 9.00 in (556 x 355 x 229 mm)
White, 5 gal Bucket & Gamma Seal Lid, Food Grade Plastic
The 5 gallon food grade HDPE plastic bucket comes with a screw on tight sealing lid. The white bucket will hold potable water for transport to campsites or for water distribution under disaster recovery conditions. The black lid provides an air tight seal and ismade form food-grade plastic. The lid design allows for stacking buckets for compact storage.
- Bucket: 5 Gallons in Volume - Food Grade HDPE Plastic - BPA Free - 90 Mils Thickness (.09 inches) - 14.5" Height, 12" Diameter
- Includes Gamma Seal Lid - Fits 3.5 to 7 Gallon Buckets - Heavy Duty Plastic
- Easy to screw open and shut - air tight seal
30 Gal Potable Water Storage Bladder
The water storage bladder holds 30 gallons of potable water in a 3 ft by 3 ft footprint. The nylon outer skin is durable and puncture resistant while the polyurethane inner is suitable for potable water storage. The drain sleeve has a male garden hose fitting and the fill sleeve has a female garden hose fitting allowing potable water hoses to extend the distance from the bladder water is collected or dispenced.
- 30-gal drinking water bladder
- Inner lining is 100% Food-Grade TPU (Polyurethane) and the Outer Shell is Durable Nylon. No BPAs, no weird taste.
- Dimensions when full: (30 Gallon) 36"W x 36"L x 14"H
- Folds to less than a square foot for easy stoarge